rapid OXY cube

rapid OXY cube is a dedicated elemental analyzer from Elementar (Germany) for precise, matrix-independent determination of oxygen by high-temperature pyrolysis at 1450 °C.

The patented backflush technology excludes gas interferences from the pyrolysis reactor and gives an accuracy of better than ± 0.1%. With an optional IR detector the detection limit is down to 10 ppm, and with a liquid sampler liquid fuels can also be analyzed.

For prices and availability, contact the Chroma team.

Description

Key features of rapid OXY cube

The specific technologies and functions of rapid OXY cube include:

Pyrolysis at 1450 °C – complete conversion of the oxygen from the sample into carbon monoxide (CO) according to the Boudouard equilibrium – a prerequisite for quantitative, matrix-independent analysis.

Backflush technology – patented reverse flushing that excludes gas interferences from the pyrolysis reactor; measurement accuracy better than ± 0.1%.

Advanced Purge and Trap (APT) – Elementar’s own technology for gas separation; a wide dynamic range – sample mass from below 1 mg to about 100 mg (soils) and up to 60 mg of organic matter, with an absolute oxygen content of up to 6 mg.

Glassy-carbon reactor – lasts for about 10,000 analyses and is inert to fluorine; low consumable costs and little maintenance.

Detectors – a thermal-conductivity detector (TCD) or an optional IR detector with a detection limit down to 10 ppm; analysis time about 14 minutes (standard) or 3–4 minutes (with IR).

Automation – a built-in 120-position autosampler; a patented ball valve for blank-free introduction; positions can be reloaded at any time.

Liquid samples – easy conversion with a liquid sampler (vario liquid sampler) for fuels such as gasoline, diesel and biodiesel.

Compliance with standards – ASTM D5622 for total oxygen in gasoline and methanol fuels.

10-year warranty – on the thermal-conductivity detector (TCD) cell.

Dimensions – 48 × 55 × 63 cm (W × D × H); carrier gas – helium.

 

Applications of rapid OXY cube

  • Oxygen in biomass, wood and pellets
  • Coal, coke and graphite
  • Liquid fuels and biofuels (gasoline, diesel, biodiesel)
  • Chemicals and pharmaceutical products
  • Petroleum products
  • Scientific research and quality control

 

Available configurations of rapid OXY cube

For maximum flexibility, rapid OXY cube is offered with the following options:

  • rapid OXY cube with TCD – standard configuration with a thermal-conductivity detector
  • IR detector – for low oxygen concentrations down to 10 ppm and a shorter analysis time
  • Liquid sampler (vario liquid sampler) – automatic introduction of liquid samples
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “rapid OXY cube”